Handyman Electrical Jobs in Dublin
Light fittings, switches and socket swaps from a same-day handyman across Dublin, Kildare, Carlow & Laois.
For the small electrical jobs around the home, our handymen fit light fittings, swap switches and sockets like-for-like, and replace fittings safely and tidily. Anything requiring certification or new circuits is carried out or signed off by a registered electrician (RECI). You will always get a fair fixed estimate on WhatsApp first, with same-day slots often available in Dublin.
How it works
Simple booking, clear pricing, trusted independent handymen.
HandymanService.ie is a booking platform, not a building contractor. Your booking fee is a small platform fee for matching you with a handyman and managing the booking. It does not go towards the handyman's charges. The work itself is carried out by an independent, insured handyman, not our employee, and you pay them directly on site once you're happy it's done.
Your Job Card lets you: Track job details · Reschedule · Request an invoice · Raise an issue · Leave a review
What's included
Clear, text-rich detail of what our handymen cover for handyman electrical jobs across Dublin, Kildare, Carlow & Laois.
Lights & fittings
- Light fixture and pendant installation
- Ceiling and wall light replacement
- Bathroom and outdoor light fittings
- Dimmer and smart-switch swaps
Switches & sockets
- Like-for-like switch replacement
- Socket and faceplate replacement
- USB socket upgrades
- Extractor fan replacement
Tell us what you need and get a fair fixed estimate before any work starts.
Get a same-day estimateDone Right The First Time
Vetted, insured tradespeople you can trust, so the job lasts and you never pay twice
Electrical jobs are the one area of the home where a shortcut you cannot see becomes a hazard you live with. That is why every handyman electrical job we send out goes to a vetted, insured tradesperson who works to the Irish wiring rules (I.S. 10101) and tests the circuit before they pack up, so your lights, sockets and alarms are safe, certified where required, and done right the first time. No race to the lowest bidder, no loose terminal waiting to flicker or arc behind the rose six months from now.
What a professional gets right
Power proven dead, not just switched off
Before a single terminal is touched the circuit is isolated at the consumer unit and proved dead with a voltage tester at the fitting itself, because a junction box can carry a second live circuit even after the local switch is off. Polarity is confirmed so live, neutral and earth land where they should, and every connection is torqued tight so nothing is left to flicker, overheat or arc.
Fittings matched to the box and the load
Heavy pendants and chandeliers are hung from a box rated to carry the weight, not the flimsy original, so nothing pulls out of the ceiling. Lamp wattage and fitting are kept within the rated load, the correct connector blocks and earth sleeving are used, and a loop-in ceiling rose is wired back exactly as found rather than guessed at.
Bathroom and outdoor lights to the right IP zone
Bathroom fittings are specified to the zone they sit in (IP65 over a shower, at least IP44 within the splash zone) and outdoor fittings are IP65 or better. Cable entries are sealed with the correct gland and a weatherproof back box so the rated protection actually holds, because a wrong gland undoes an IP rating in minutes and lets damp into the terminals.
Sockets, switches and alarms fitted to standard
Sockets and switches are replaced on the matching I.S. 411 / BS 1363 pattern with the conductors dressed neatly into a sound back box, no trapped copper, no over-stripped cores. Smoke and CO alarms are positioned to the regulations, a CO alarm within five metres of every bedroom and in any room with a fuel-burning appliance, and interlinked units are linked and function-tested together.
Extractor fans vented properly to outside
Replacement extractor fans are ducted by the shortest run to a dedicated exterior vent cap, never left to dump into a loft or wall cavity where the moisture breeds mould. The duct is pitched to drain, insulated through cold spaces and pulled tight to kill sag, and a backdraught shutter is fitted so cold air and damp do not track back in.
Where cheaper jobs go wrong
Working a circuit that was only switched off at the wall, not isolated and proved dead at the consumer unit
The cost: A shared junction box can stay live, so the cheap operator gets a shock or shorts the circuit, and you pay for a callout to repair the damage on top of an installation that was never safe to begin with
Hanging a heavy fixture off the original lightweight ceiling box
The cost: The box tears out of the plasterboard and the fitting drops, taking a chunk of ceiling with it, so you pay twice: once to patch and repaint the ceiling, again to refit the light on a box that should have been rated from the start
Fitting a non-rated light in a bathroom or outdoors, or using the wrong cable gland
The cost: Moisture gets into the terminals, the fitting corrodes and trips the RCD, and you are left in the dark within a season, with the replacement plus the electrician to diagnose the tripping landing back on your bill
Venting a new extractor fan into the loft or leaving loose, sagging ducting
The cost: Warm wet air condenses in the roof and you get damp, staining and black mould that costs far more to remediate than the fan ever did, never mind a fan that barely clears the room it was bought to dry out
Our commitment to you
- ✓Power is isolated and proved dead at the fitting before any work starts, and the circuit is tested for correct polarity and earthing before we hand it back
- ✓Light, socket and alarm fittings are installed to the Irish wiring rules (I.S. 10101) by a vetted, insured tradesperson, with certification provided where the work requires it
- ✓Bathroom and outdoor fittings are matched to the correct IP zone and sealed so the rated protection genuinely holds
- ✓Extractor fans are vented to outside through proper ducting, never into a loft or cavity, with a backdraught shutter fitted
- ✓It is done right the first time, so you are not paying a second tradesperson to undo a cheap job, and the work is left tidy and tested
Electrical work is no place to gamble on the lowest bid. Choose HandymanService.ie and a vetted, insured, experienced tradesperson does the job to standard, tests it, and leaves it safe, so the only thing you have to think about afterwards is switching it on.
Our recent work
Real projects completed by handymen through our platform.
Why book through HandymanService.ie
The trusted platform for finding professional handymen in Dublin, Kildare, Carlow & Laois
Same-Day Appointments
Book by 1 pm and a same-day slot is often available in Dublin.
Vetted & Insured
Background-checked handymen carrying public liability insurance.
Fair Fixed Estimate First
You see the price on WhatsApp before any work begins, no surprises.
Local To Your Area
Covering Dublin, Kildare, Carlow & Laois.
Frequently asked questions
Book handyman electrical jobs in Dublin, Kildare, Carlow or Laois
Message us on WhatsApp for a fair fixed estimate. Same-day slots often available.
Get a same-day estimate →